Type 2 Portable EV Charger | 10 Amp Plug

Model
google-reviews

QUICK OVERVIEW

 Type 2 Portable EV Charger with Australian Plug allows you to charge your electric vehicle via a standard Australian wall socket.

  • Power Single Phase: 2kW, 8 Amp  (12km of driving per hour of charge)
  • LED Display | Temperature | Time | Power | Status
  • 5 Metre Premium lightweight cable
  • 2 Year Warranty
SKU: OC-PCD030-8A-T2

This cutting-edge Type 2 (Mennekes) 8 Amp Portable EV Charger with Australian Plug allows you to charge your electric vehicle via a standard Australian wall socket.

Compatible with all-electric vehicles and models including: Audi, BMW, BYD, EQC, Holden, Honda, Hyundai, Jaguar, KIA, Mazda, Mercedes Benz, MG, Mini, Mitsubishi, Nissan, Polestar, Renault, Rivian, TESLA, Toyota, Volkswagen, Volvo

Integrated Cable HolderWhat is the difference between a basic and premium portable electric vehicle charger?

The difference between our basic and premium portable electric vehicle charger (EVC) is in the smart LED display. This screen monitors the temperature, time and power status of your EVC. This gives you an advantage over the basic portable EVC as you can confirm that your station is working effectively due to the transparency that the LED display provides for you.

7174208Can I use an extension cable for the portable EVC ?

No. We do not recommend the use of an extension cable for a 10-amp portable EVC, as the extension cables are not designed for high power usage. The current going through the portable EVC is not supported on a regular extension cable and can overheat the extension cable, damaging the cable extender and creating a potential fire hazard.

Instead you should consider owning our 9m Portable Type 2 EV Charger, that has the internal cabling suited for electric car charging.

7174210What is the importance of the temperature setting?

The Temperature setting gives electric vehicle drivers a sense of confidence. This sensor monitors the temperature and modulates the power output to prevent any risk of fire.

International CustomersAdvanced Safety Features IEC/EN Standards

Our EVC is one of the few that meet all Australian requirements.

This means we meet required control and safety functions. This standard applies to portable devices performing simultaneously the functions of detection of the residual current, of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value.

Working EnvironmentCan I Charge in the Rain?

Yes it can, the product is rated at IP66, meaning that it can withstand water and ingrest This means that the portable EVC is suitable to power your vehicle in the rain. IP66 Enclosure – IP rated as “dust tight” and protected against heavy seas or powerful jets of water.

4264172Where I can use this portable station?

This portable station can be used on any standard 10amp power outlet. We often say you can use any standard outlet that you would use to power your kettle or microwave. As mentioned, ensure that the charging station is close to your vehicle, as extension cables are not recommended.

7174228What is the difference between a charging cable and a portable EVC?

A portable EVC plugs in to a 10amp socket and your automobile, whilst a charging cable plugs into a universal electric vehicle station and your car. Ideally, we would recommend that the electric vehicle driver carry both, to ensure they can make the most of all power outlets available.

What is the difference between a 10amp and a 15amp charging station?

The difference in the 10amp and the 15amp charging stations lies within the charging speeds. For example, a 8 amp portable EVC powers your car at approximately 10kms/per hour whilst a 15amp electric vehicle charger powers your automobile at approximately 20km/ per hour. Electric car users can often be confused between the two power outlets, the main difference is that the earth (bottom pin) is significantly larger on the 15-amp outlet. Please refer to the image below. 10amp outlets are most commonly found around the house, where a 15amps are found at some households or commercial buildings.

10amp powerpoint

Multiple VariationsSpecifications:

  • Light Weight 2.1kg
  • 5 metre length
  • RCD Type A for maximum electrical safety. This is a requirement for EV charging not present in many generic portables.
  • LED display temperature control to prevent overheating
  • IP66 Waterproof with ABS materials for strength
  • LED screen indicating charging speed, time and energy transferred
  • Meets international & Australian standards
  • Auto charge recovery
  • Overcurrent protection
  • Warranty: 2 Year;
  • Operating Temperature:-25℃ to +55℃

Additional information

Weight 2.1000 kg
Dimensions 180 × 75 × 50 cm
amp

Premium | 10 Amp Plug | 10 Metre Length, Premium | 10 Amp Plug | 5 Metre Length, Premium | 15 Amp Plug | 5 Metre Length, Standard | 10 Amp Plug | 5 Metre Length

kw

2 kW

length

5M

Warranty

2 Years

1 review for Type 2 Portable EV Charger | 10 Amp Plug

  1. Alexander Alvaro

    Ben was amazing and it arrived in 2 days!

Add a review

Your email address will not be published. Required fields are marked *

Content not found.